Mobile Connect; Turn On Or Off Mobile Connect To All Your Remote Destinations From Your Desk Phone; Switch An In-Progress Call On Your Desk Phone To A Mobile Phone - Cisco 6961 - Unified IP Phone Standard VoIP Software Manual

Mobile Connect

Mobile Connect allows you to use your mobile phone to handle calls associated with your desk phone
number.
To set up Mobile Connect, use the User Options web pages to set up remote destinations and create
access lists to allow or block calls from specific phone numbers from being passed to the remote
destinations.
When you enable Mobile Connect:
• Your desk phone and remote destinations receive calls simultaneously.
• When you answer the call on your desk phone, the remote destinations stop ringing, are
disconnected, and display a missed call message.
• When you answer the call on one remote destination, the other remote destinations and desk
phone stop ringing, are disconnected, and a missed call message is shown on the other remote
destinations.
Related Topics
Create an Access List, page 76
•
Add a New Remote Destination, page 75
•
Turn On or Off Mobile Connect to All Your Remote Destinations From
Your Desk Phone
1. Press the Mobility button to display the current remote destination status (Enabled or Disabled).
2. Press the Select button to change the status.
3. Press the Exit softkey.
Related Topics
Add a New Remote Destination, page 75

Switch an In-Progress Call on Your Desk Phone to a Mobile Phone

1. Press the Mobility button.
2. Select Send call to mobile.
3. Answer the in-progress call on your mobile phone.
The desk phone line button turns red and handset icons and the calling party number appear on
the phone display. You cannot use the same phone line for any other calls, but if your desk phone
supports multiple lines, you can use another line to make or receive calls.
Cisco Unified IP Phone 6921, 6941, and 6961 User Guide for Cisco Unified Communications Manager 7.1 (SCCP)
Calling Features
57