Displaying The Logging Configuration - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

System Message Logging
Command
Step 4
logging facility facility-type
Step 5
end
Step 6
show running-config
Step 7
copy running-config startup-config
To remove a syslog server, use the no logging host global configuration command, and specify the syslog
server IP address. To disable logging to syslog servers, enter the no logging trap global configuration
command.
Table 4
information about these facilities, consult the operator's manual for your UNIX operating system.
Table 4
Facility Type Keyword
auth
cron
daemon
kern
local0-7
lpr
mail
news
sys9
sys10
sys11
sys12
sys13
sys14
syslog
user
uucp

Displaying the Logging Configuration

To display the current logging configuration and the contents of the log buffer, use the show logging
privileged EXEC command. For information about the fields in this display, refer to the Cisco IOS
Configuration Fundamentals Command Reference for Release 12.2.
To display the logging history file, use the show logging history privileged EXEC command.
Purpose
Configures the syslog facility. See
keywords.
The default is local7.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
lists the 4.3 BSD UNIX system facilities supported by the Cisco IOS software. For more
Logging Facility-Type Keywords
Description
Authorization system
Cron facility
System daemon
Kernel
Locally defined messages
Line printer system
Mail system
USENET news
System use
System use
System use
System use
System use
System use
System log
User process
UNIX-to-UNIX copy system
Table 4 on page 11
Cisco 3200 Series Wireless MIC Software Configuration Guide
Displaying the Logging Configuration
for facility-type
11