Configuration Examples - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring a WMIC for MCP (12.3(8)JK Only)
Command
Step 5
encryption [vlan vlan-id ] key 1-4
size {40bit | 128Bit} encryption-key
[transmit-key]
Step 6
ssid ssid-name
Step 7 end
Step 8 copy running-config startup-config (Optional) Saves your entries in the configuration file.
When you enable or disable the multiple client profiles feature, all ssid and encryption commands are
removed from the interface.

Configuration Examples

You can configure a WMIC device in universal workgroup bridge mode and enable multiple client
profiles to support up to 16 client profiles. The example in this section describes four client profiles with
different encryption and authentication settings and assigned VLAN IDs.
Table 2
Table 2
Client Profile
SSID
Authentication Type
Encryption Type
Assigned VLAN ID
The following commands are used to configure the client profiles.
Client profile A:
Cisco 3200 Series Wireless MIC Software Configuration Guide
6
shows the settings for the four client profiles.
Multiple Client Profile Example
A
FREE_NET LEAP_TKIP
open
none
8
Purpose
Configures proper encryption for each SSID bounded by dot11
VLANID. For this step, it is assumed that SSID security has
already been configured.
Example:
#encryption vlan 11 key 3 size 40bit abcdef9876
#encryption vlan 11 mode wep mandatory
#encryption vlan 21 key 2 size 128bit
98765432109876543210abcdef
#encryption vlan 21 mode wep mandatory key-hash
#encryption vlan 34 mode wep mandatory mic key-hash
#encryption vlan 35 mode ciphers tkip wep128
Enables the SSID for this interface.
Examples:
#ssid v11_open_wep40
#ssid v21_open_wep128
#ssid v34_wpapsk_tkip
#ssid v35_wpapsk_aes
Returns to privileged EXEC mode.
B C
EAPTLS_AES WPAPSK_WEP128
LEAP EAP_TLS
TKIP AES
25 102
Multiple Client Profiles
D
WPA PSK
128bits WEP key
11