Configuring The Time Zone - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Administering the WMIC

Configuring the Time Zone

To manually configure the time zone, follow these steps, beginning in privileged EXEC mode:
Command
Step 1 configure terminal
Step 2 clock timezone zone hours-offset
[minutes-offset]
Step 3 end
Step 4 show running-config
Step 5 copy running-config startup-config
The minutes-offset variable in the clock timezone command is available for those areas where a local
time zone is only a percentage of an hour different from UTC. For example, the time zone for some
sections of Atlantic Canada (AST) is UTC-3.5, where the 3 means 3 hours and .5 means 50 percent. In
this case, the necessary command is clock timezone AST -3 30.
To set the time to UTC, use the no clock timezone command in global configuration mode.
Purpose
Enters global configuration mode.
Sets the time zone.
The device keeps internal time in universal time coordinated (UTC), so
this command is used only for display purposes and when the time is
manually set.
For zone, enter the name of the time zone to be displayed when
•
standard time is in effect. The default is UTC.
For hours-offset, enter the hours offset from UTC.
•
(Optional) For minutes-offset, enter the minutes offset from UTC.
•
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Cisco 3200 Series Wireless MIC Software Configuration Guide
Managing the System Time and Date
45