Chapter 2: Getting Started With The Configuration Utility; Logging In To The Configuration Utility - Cisco SRP521W Administration Manual

Getting Started with the Configuration Utility

Logging In to the Configuration Utility

STEP 1
STEP 2
STEP 3
NOTE
Services Ready Platform SRP 500 Series Administration Guide
This chapter describes how to login and use the Services Ready Platform
Configuration Utility.
• Logging In to the Configuration Utility, page 15
• Using the Configuration Utility, page 16
Before you begin to use the Configuration Utility, make sure that you have a
computer that meets the following requirement:
• • Adobe Flash Player version 9.0. 1 24 or later. Visit
flashplayer/ to download and install the latest Adobe Flash Player.
Connect a computer to an available LAN port of your Services Ready Platform.
By default, your PC will become a DHCP client of the Cisco SRP 500 Series
Services Ready Platform and will receive an IP address in the 192. 1 68. 1 5.x range.
Start a web browser. In the Address bar, enter the default IP address of the Cisco
SRP 500 Series Services Ready Platform: http://192. 1 68. 1 5. 1 .
When the login page appears, enter the username and password to login as the
administrator.
The default username is admin.
The default password is admin.
Passwords are case sensitive.
2
http://get.adobe.com/
15