Default Banner Configuration; Configuring A Message-Of-The-Day Login Banner - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Creating a Banner

Default Banner Configuration

The MOTD and login banners are not configured.

Configuring a Message-of-the-Day Login Banner

You can create a single- or multiple-line message banner that appears on the screen when someone logs
in to the WMIC.
To configure a MOTD login banner, follow these steps, beginning in privileged EXEC mode:
Command
Step 1 configure terminal
Step 2 banner motd c message c
Step 3
end
Step 4
show running-config
Step 5
copy running-config startup-config
To delete the MOTD banner, use the no banner motd global configuration command.
This example shows how to configure a MOTD banner for the WMIC by using the pound sign (#) as the
beginning and ending delimiter:
bridge(config)# banner motd #
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
#
bridge(config)#
This example shows the banner displayed from the previous configuration:
Unix> telnet 172.2.5.4
Trying 172.2.5.4...
Connected to 172.2.5.4.
Escape character is '^]'.
This is a secure site. Only authorized users are allowed.
For access, contact technical support.
User Access Verification
Password:
Cisco 3200 Series Wireless MIC Software Configuration Guide
4
Purpose
Enters global configuration mode.
Specifies the message of the day.
For c, enter the delimiting character of your choice, such as a pound sign
(#), and press the Return key. The delimiting character signifies the
beginning and end of the banner text. Characters after the ending
delimiter are discarded.
For message, enter a banner message up to 255 characters. You cannot
use the delimiting character in the message.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Administering the WMIC