Configuring The Ssid; Creating An Ssid - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring the SSID

Configuring the SSID
These sections contain configuration information for the SSID. By default, there is no SSID configured
under dot11 interface and therefore, the dot11 interface remains down.

Creating an SSID

To create an SSID for a WMIC, follow these steps, beginning in privileged EXEC mode:
Command
Step 1
configure terminal
Step 2 dot11 ssid ssid-string
Step 3 accounting list-name
Step 4 vlan vlanid-or-name
Step 5 end
Use the no form of the command to disable the SSID.
Use the ssid authentication options to configure an authentication type for the SSID. See
Note
Types"
encryption settings for the SSID. See
settings. Use the ssid priority to configure priority for the SSID, See
Later
The following example shows how to
•
•
•
bridge# configure terminal
bridge(config)# dot11r ssid bridgeman
bridge(config-ssid)# accounting accounting-method-list
bridge(config-ssid)# vlan 1
bridge(config-ssid)# encryption mode cipher wep 128
bridge(config-ssid)# priority 10
bridge(config-ssid)# infrastructure-ssid
bridge(config-ssid)# end
Cisco 3200 Series Wireless MIC Software Configuration Guide
2
for instructions on configuring authentication types. Use the ssid encryption option to configure
Releases.
Name an SSID
Configure the SSID for RADIUS accounting
Assign the SSID to the native VLAN
Purpose
Enters global configuration mode.
Creates an SSID and enter SSID configuration mode for the
new SSID. The SSID can consist of up to 32 alphanumeric
characters. SSIDs are case sensitive.
You can include spaces in an SSID, but do not add
Note
spaces at the end of the SSID.
(Optional) Enables RADIUS accounting for this SSID. For
list-name, specify the accounting method list. For more
information on method lists, click this link:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios
122/122cgcr/fsecur_c/fsaaa/scfacct.htm#xtocid2
(Optional) Assigns the SSID to a VLAN on your network using
the VLAN ID or name.
Returns to privileged EXEC mode.
Cipher Suites and WEP for instructions on configuring encrypton
Service Set Identifiers
"Authentication
Setting Priority in 12.4(3)JK and