Spanning Tree Protocol In A Wireless Environment; Understanding Spanning Tree Protocol - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Spanning Tree Protocol in a Wireless
Environment
This module describes how to configure Spanning Tree Protocol (STP) on your wireless device when it
is operating in the role of a bridge in the following sections:
•
•
•
STP is available only when the wireless device is in bridge mode.
Note

Understanding Spanning Tree Protocol

This section describes how spanning-tree features work. It includes this information:
•
•
•
•
•
•
•
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2008 Cisco Systems, Inc. All rights reserved.
Understanding Spanning Tree Protocol, page 1
Configuring STP Features, page 8
Displaying Spanning-Tree Status, page 14
STP Overview, page 2
STP Support, page 2
Bridge Protocol Data Units, page 3
Election of the Spanning-Tree Root, page 4
Spanning-Tree Timers, page 4
Creating the Spanning-Tree Topology, page 4
Spanning-Tree Interface States, page 5