Configuring Filters - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring Filters

Configuring Filters
To configure filters using Cisco IOS CLI commands, you use access control lists (ACLs) and bridge
groups. You can find explanations of these concepts and instructions for implementing them in these
documents:
•
•
Cisco 3200 Series Wireless MIC Software Configuration Guide
2
Cisco IOS Bridging and IBM Networking Configuration Guide, Release 12.2. Click this link to
browse to the "Configuring Transparent Bridging" chapter:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fibm_c/bcfpart1/bcftb.
htm
Catalyst 4908G-L3 Cisco IOS Release 12.0(10)W5(18e) Software Feature and Configuration Guide.
Click this link to browse to the "Command Reference" chapter:
http://www.cisco.com/univercd/cc/td/doc/product/l3sw/4908g_l3/ios_12/10w518e/config/cmd_ref.
htm
Filters