Example: Eap Authentication - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring the WMIC for the First Time
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
rts threshold 4000
station-role root
infrastructure-client
bridge-group 1
!
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
!
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 spanning-disabled

Example: EAP Authentication

This example shows part of the configuration that is used to create an SSID called eap_ssid, excluding
the SSID from the beacon, and assigning the SSID to VLAN 30:
encryption vlan 30 mode wep mandatory
!
Dot11 ssid eap_ssid
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid no_security-ssid
!
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
rts threshold 2312
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
vlan 30
authentication open eap eap_methods
authentication network-eap eap_methods
Cisco 3200 Series Wireless MIC Software Configuration Guide
Protecting Your Wireless LAN
7