Matching Authentication Types On Root Devices And Non-Root Bridges - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Authentication Types
Matching Authentication Types on Root Devices and Non-Root
Bridges
To use the authentication types described in this section, the root device authentication settings must
match the settings on the non-root bridges that associate to the root device.
Note Root devices include root bridges and access points. Non-root bridges include workgroup bridges, and
non-root bridges.
Table 2
Table 2
Security Feature
Static WEP with open
authentication
Static WEP with shared key
authentication
LEAP authentication
CCKM key management
WPA key management
lists the settings required for each authentication type on the root and non-root bridges.
Client and Bridge Security Settings
Non-Root Bridge Setting
Set up and enable WEP and enable
open Authentication.
Set up and enable WEP and enable
shared key authentication.
Configure a LEAP username and
password and enable network-EAP
authentication.
Set up and enable WEP and enable
CCKM authentication.
Set up and enable WEP and enable
WPA authentication.

Matching Authentication Types on Root Devices and Non-Root Bridges

Cisco 3200 Series Wireless MIC Software Configuration Guide
Root Device Setting
Set up and enable WEP and enable
open Authentication.
Set up and enable WEP and enable
shared key Authentication.
Enable network-EAP
authentication.
Set up and enable WEP and enable
CCKM authentication, configure
the root device to interact with your
WDS device, and add the root
device to your authentication
server as a client device.
Set up and enable WEP and enable
WPA authentication.
25