Chapter 19 Configuring 802.1Q And Layer 2 Protocol Tunneling; Understanding 802.1Q Tunneling - Cisco 4500M Software Manual

Software guide
Table of Contents

Advertisement

Configuring 802.1Q and Layer 2 Protocol
Tunneling
Virtual private networks (VPNs) provide enterprise-scale connectivity on a shared infrastructure, often
Ethernet-based, with the same security, prioritization, reliability, and manageability requirements of
private networks. Tunneling is a feature designed for service providers who carry traffic of multiple
customers across their networks and who are required to maintain the VLAN and Layer 2 protocol
configurations of each customer without impacting the traffic of other customers. The Catalyst 4500
series switch supports IEEE 802.1Q tunneling and Layer 2 protocol tunneling.
802.1Q requires Supervisor Engine V; Layer 2 protocol tunneling is supported on all supervisor engines.
Note
Note
For complete syntax and usage information for the switch commands used in this chapter, refer to the
Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/index.htm.
This chapter contains these sections:

Understanding 802.1Q Tunneling

The VLAN ranges required by different customers in the same Service Provider network might overlap,
and customer traffic through the infrastructure might be mixed. Assigning a unique range of VLAN IDs
to each customer would restrict customer configurations and could easily exceed the VLAN limit (4096)
of the 802.1Q specification.
802.1Q tunneling enables Service Providers to use a single VLAN to support customers who have
multiple VLANs, while preserving customer VLAN IDs and keeping traffic in different customer
VLANs segregated.
OL-6696-01
Understanding 802.1Q Tunneling, page 19-1
Configuring 802.1Q Tunneling, page 19-4
Understanding Layer 2 Protocol Tunneling, page 19-7
Configuring Layer 2 Protocol Tunneling, page 19-9
Monitoring and Maintaining Tunneling Status, page 19-12
C H A P T E R
Software Configuration Guide—Release 12.2(25)EW
19
19-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 series

Table of Contents