Cisco 4500M Software Manual page 65

Chapter 3 Configuring the Switch for the First Time
Changing the Default Privilege Level for Lines
To change the default privilege level for a given line or a group of lines, perform this task:
Command
Switch(config-line)# privilege level level
For information on how to display the password or access level configuration, see the
Password, Access Level, and Privilege Level Configuration" section on page
Logging In to a Privilege Level
To log in at a specified privilege level, perform this task:
Command
Switch# enable level
Exiting a Privilege Level
To exit to a specified privilege level, perform this task:
Command
Switch# disable level
Displaying the Password, Access Level, and Privilege Level Configuration
To display detailed password information, perform this task:
Command
Step 1
Switch# show running-config
Step 2
Switch# show privilege
This example shows how to display the password and access level configuration:
Switch# show running-config
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug datetime localtime
service timestamps log datetime localtime
no service password-encryption
!
hostname Switch
!
boot system flash sup-bootflash
enable password lab
!
<...output truncated...>
OL-6696-01
Controlling Access to Privileged EXEC Commands
Purpose
Changes the default privilege level for the line.
Purpose
Logs in to a specified privilege level.
Purpose
Exits to a specified privilege level.
Purpose
Displays the password and access level configuration.
Shows the privilege level configuration.
Software Configuration Guide—Release 12.2(25)EW
"Displaying the
3-17.
3-17