Displaying Vrf-Lite Status - Cisco 4500M Software Manual

Chapter 28 Configuring VRF-lite
Router(config)# router bgp 100
Router(config-router)# address-family ipv4 vrf v2
Router(config-router-af)# neighbor 83.0.0.8 remote-as 800
Router(config-router-af)# neighbor 83.0.0.8 activate
Router(config-router-af)# network 3.3.2.0 mask 255.255.255.0
Router(config-router-af)# exit
Router(config-router)# address-family ipv4 vrf vl
Router(config-router-af)# neighbor 83.0.0.8 remote-as 800
Router(config-router-af)# neighbor 83.0.0.8 activate
Router(config-router-af)# network 3.3.1.0 mask 255.255.255.0
Router(config-router-af)# end

Displaying VRF-lite Status

To display information about VRF-lite configuration and status, perform one of the following tasks:
Command
Switch# show ip protocols vrf vrf-name
Switch# show ip route vrf vrf-name
[ ]] [ ] [
as-number
list mobile
[ ]
supernets-only
[
Switch# show ip vrf brief
Note For more information about the information in the displays, refer to the Cisco IOS Switching Services
Command Reference for Release 12.2 at:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fswtch_r
OL-6696-01
[ ] [
connected protocol
] [ ] [ ] [ ] [
odr profile static
| | ] [
detail interfaces
Purpose
Displays routing protocol information associated
with a VRF.
Displays IP routing table information associated
]
summary
with a VRF.
]
Displays information about the defined VRF
vrf-name
instances.
Software Configuration Guide—Release 12.2(25)EW
Displaying VRF-lite Status
28-11