Configuring Layer 2 Etherchannels - Cisco 4500M Software Manual

Chapter 17 Understanding and Configuring EtherChannel
Partner's information:
Port
Fa5/4
Age of the port in the current state: 00h:54m:52s
Switch#
This example shows how to verify the configuration of port-channel interface 1 after the interfaces have
been configured:
Switch# show etherchannel 1 port-channel
Group: 1
------------
Port-channel: Po1
------------
Age of the Port-channel
Logical slot/port
GC
Port state
Ports in the Port-channel:
Index
-------------------
1
0
Time since last port bundled:
Switch#

Configuring Layer 2 EtherChannels

To configure Layer 2 EtherChannels, configure the Ethernet interfaces with the channel-group
command. This creates the port-channel logical interface.
Cisco IOS software creates port-channel interfaces for Layer 2 EtherChannels when you configure
Note
Layer 2 Ethernet interfaces with the channel-group command.
OL-6696-01
Partner
Name
JAB031301
Channel-group listing:
----------------------
Port-channels in the group:
----------------------
= 01h:56m:20s
= 10/1
= 0x00010001
= Port-channel L3-Ag Ag-Inuse
Load Port
00 Fa5/6
00 Fa5/7
Partner Partner
Device ID Port
0050.0f10.230c 2/45
Number of ports = 2
HotStandBy port = null
00h:23m:33s Fa5/6
Software Configuration Guide—Release 12.2(25)EW
Configuring EtherChannel
Partner Group
Age Flags Cap.
1s SAC 2D
17-9