Cisco 2431 - IAD Router Software Configuration Manual page 73

Chapter 3 Configuring with the Command-Line Interface
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router# enable
Step 2
copy running-config startup-config
Example:
Router# copy running-config startup-config
Step 3
Ctrl-z
Example:
Router# Ctrl-z
OL-4306-03
Purpose
Enters privileged EXEC mode.
Saves the configuration changes to NVRAM so that they
are not lost during resets, power cycles, or power
outages.
Returns to enable mode when you finish configuring the
interfaces.
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
Saving Configuration Changes
3-39