Cisco 2431 - IAD Router Software Configuration Manual page 59

Chapter 3 Configuring with the Command-Line Interface
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router# enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
voice-port slot/port
Example:
Router(config)# voice-port 0/1
Step 4
connection {trunk|plar|tie-line|plar-opx} string
Example:
Router(config-voice-port)# connection tie-line
5550100
Step 5
dial-type {pulse|dtmf|mf}
Example:
Router(config-voice-port)# dial-type pulse
OL-4306-03
enable
configure terminal
voice-port slot/port
connection
dial-type
signal
compand-type
cptone local
description string
exit
Ctrl-z
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
Configuring a VIC2-2FXO or VIC2-4FXO Voice Interface Card
Purpose
Enters privileged EXEC mode.
Enters global configuration mode.
Enters voice-port configuration mode. See
Numbering Conventions, page
Configures the voice-port connection mode type and the
destination telephone number.
The plar value is used for private line automated
ringdown (PLAR) connections. The tie-line value is used
for a tie-line connection to a PBX. The plar-opx value,
for PLAR off-premises extension, allows the local voice
port to provide a local response before the remote voice
port receives an answer.
Configures the voice-port dial-type. The default is dtmf.
Port
1-5.
3-25