Cisco 2431 - IAD Router Software Configuration Manual page 109

Appendix B Formatting the Flash Memory
Enter a Directory and Determine Which Directory You Are In
To enter a directory in flash memory, use the cd command.
To determine which directory you are in, use the pwd command.
If you enter only cd, you will go to the default home directory, which is flash:/.
The following example shows sample output, respectively, for the following actions:
Entering the home directory (flash:/) of flash memory in an internal slot
•
Verifying that you are in the home directory
•
Displaying the contents of the home directory
•
Entering the /config directory
•
Verifying that you are in the /config directory
•
Entering the home directory of flash memory in an external slot (slot0:/)
•
Verifying that you are in the slot0:/ directory
•
Returning to the home directory (flash:/)
•
• Verifying that you are in the home directory
Router# cd
Router# pwd
flash:
Router# dir
Directory of flash:/
1580
128094208 bytes total (121630720 bytes free)
Router# cd config
Router# pwd
flash:/config/
Router# cd slot0:
Router# pwd
slot0:/
Router# cd
Router# pwd
flash:
OL-4306-03
3 -rw- 6458208 Mar 01 2008 00:04:08
drw- 0 Mar 01 2008 23:48:36
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
File and Directory Operations
c2430-is-mz.tmp
config
B-13