Saving Configuration Changes
Command or Action
Step 7
shutdown
isdn layer1-emulate {user|network}
no shutdown
Example:
Router(config-if)# shutdown
Router(config-if)# isdn layer1-emulate user
Router(config-if)# no shutdown
Step 8
line-power
Example:
Router(config-if)# line-power
Step 9
isdn protocol-emulate {user|network}
Example:
Router(config-if)# isdn protocol-emulate user
Step 10
exit
Example:
Router(config-if)# exit
Saving Configuration Changes
Perform the following steps to prevent loss of the Cisco IAD configuration.
SUMMARY STEPS
1.
2.
3.
Cisco IAD2430 Series Integrated Access Devices Software Configuration Guide
3-38
enable
copy running-config startup-config
Ctrl-z
Chapter 3
Configuring with the Command-Line Interface
Purpose
Shuts down the interface.
Configures the Layer 1 port mode and clock settings:
•
Enter user to configure the port as TE and to
function as a clock slave. This is the default.
•
Enter network to configure the port as NT and to
function as a clock master.
Activates the interface after the port configuration.
(Optional only for NT-configured ports.) Turns on the
power supplied from the port to a TE device.
Configures the Layer 2 port protocol emulation:
Enter user to configure the port as TE so that the
•
PBX is the master. This is the default.
Enter network to configure the port as NT so that the
•
PBX is the slave.
Exits global configuration mode.
OL-4306-03