Makita RM350D Setup Manual page 30

Grass lawn fields on small hills
A hillside landscape of a green lawn in a park, golf course or the likes. The lawn grows at different heights and shades on one or more gentle and
steep slopes with some sand and water features.
1
2
3
Fig.52
► 1. Charging station 2. Boundary wire 3. Guide wire
Practical guidance
Mowing area
Weekly working days and hours
Departure method from station [execution pri-
ority (%)]
Need to create sub area settings
Tips for installations and settings
A
C
2
2,500 m
24 hours on 7 days of the week
Depart directly from the charging station at [40%]. Refer to the mower departing point "A" in the figure.
Depart towards the one end of a level lawn surface on the hill and start mowing from the guide wire termination area
at [30%]. Refer to the mower departing point "B" in the figure.
Depart towards the far end of a slightly sloped lawn surface on the downhill and start mowing from the guide wire
termination area at [30%]. Refer to the mower departing point "C" in the figure.
No
Place the charging station at the one end of the half way line which divides the level lawn surface on the hill into two
equal left and right areas.
Install two guide wires along the half way line which divides the mowing area into two equal upper and lower areas.
One towards the one end of a level lawn surface on the hill, and the other towards the far end of a slightly sloped
lawn surface on the downhill.
Be sure to install a boundary wire on surfaces that are nearly flat or as less sloped as possible.
Run a guide wire diagonally across a slope as it makes it easier for Robotic Mower to climb the slope.
B
30 ENGLISH