Makita RM350D Setup Manual page 25

Robotic mower

Hide thumbs Also See for RM350D:

Press

keys to enter PIN code.

Fig.42

Enter the PIN code again for confirmation.

Fig.43

NOTE: Write down the PIN code and keep it in a safe place so that you do not forget it.

Checking the Wire Installation

Checking departure from the charging station

[Top menu] > [Main menu] > [Navigation preferences] > [Mower departing points]

Follow the procedure below and check that the Robotic Mower departs from the charging station. In departure operation, the Robotic Mower saves

the magnetic field strength of the charging station in its memory to enable proper docking.

NOTICE: Be sure to check departure after installing the wires. Otherwise the Robotic Mower may navigate at slow speed on the guide wire or

may not navigate at slow speed on the charging station.

NOTICE: Dock the Robotic Mower with the charging station before setting the departure method.

Press the

button on the control panel.

The [Main menu] appears.

Select

[Navigation preferences] on the display with the

The sub menu appears.

Select [Mower departing points].

The menu select screen appears.

Select the profile number of the departure method that you want to set with

Fig.44

keys, and press the

key.

keys, and press

ENGLISH

key.

Table of Contents