Makita RM350D Setup Manual page 2

Introduction
This manual is the Robotic Mower Setup Guide. This manual describes the procedures for installation of charging station, installation of boundary
wire, installation of guide wire, and initial setting of the Robotic Mower. Be sure to check the Instruction Manual of this product regarding precau-
tions for use.
About the Robotic Mower
Robotic Mower performs laborious lawn mowing automatically. This product has following main components.
• Robotic Mower
This is the main unit that mows the lawn. It is charged by the charging station and automatically mows the lawn within the work area.
• Charging station
This charges the Robotic Mower and flows signals in the boundary wire and guide wire.
• Boundary wire
This wire is installed around the outermost side of the work area. It lets the Robotic Mower recognize the work area in which to mow the lawn.
• Guide wire
This wire leads the Robotic Mower to the charging station. This wire also guides the lawn mower to areas that the lawn mower works less fre-
quently due to topographical reasons, etc.
(Installation of the guide wire is optional.)
Fig.1
► 1. Robotic Mower 2. Charging station 3. Boundary wire 4. Guide wire
NOTE: It is recommended to make an installation drawing of the work area as illustrated above before performing the wire installation work.
Description of manuals
Setup Guide
•
This describes the procedures for installation of charging station, installation of boundary wire, installation of guide wire installation, and initial
setting of the Robotic Mower.
• Instruction Manual of this product
This describes the main functions, safety precautions, various settings, and maintenance of the Robotic Mower.
2
4
2 ENGLISH
3
1