Makita RM350D Setup Manual page 18

Securing the charging station
Make sure that the cabtire cable can reach to the charging station and then secure it with screw pegs (8pcs) using the hex wrench 6.
Fig.23
► 1. Hex wrench 6 2. Screw peg (for fixing the charging station) (8 pcs)
Connecting the Wires to the Charging Station
When finished installing the wires, connect the boundary wire, guide wire, and cabtire cable to the charging station.
Connecting the boundary wire
1. Open the terminal cover and remove the wire cover of the charging station.
Fig.24
► 1. Terminal cover 2. Wire cover
1
1
18 ENGLISH
2
2