Makita RM350D Setup Manual page 8

a) 15 cm or more b) 35 cm or more
a) 150 cm or more b) 150 cm or more
a) 35 m or less
Image
(b)
(a)
(a)
(b)
(a)
Place partitions (obstacles) with a height of 15 cm or more around the areas that
the Robotic Mower should never enter. In addition, install the boundary wire 35 cm
or more away from the partition in order to prevent contact with the partition. (An
area of about 25 cm will be left unmowed. )
Do not bundle cables and wires. Doing so may intensify the signal and the Robotic
Mower will not operate properly.
- The width of the work area should be at least 150 cm or more. The Robotic
Mower returns to the charging station by following the boundary wire in
counterclockwise.
- Ensure that the boundary wire is at least 150 cm from the side of the charging
station.
Place the boundary wire so that the distance from the boundary wire to the
Robotic Mower is less than 35 m. If the distance from the nearest boundary wire to
the Robotic Mower is more than 35 m, the Robotic Mower will not work properly.
8 ENGLISH
Condition