Makita RM350D Setup Manual page 28

2. Press the "STOP" button.
The display cover opens.
3. Press the button, select [Stay at charging station], and press the
4. Close the display cover.
The Robotic Mower starts mowing navigation toward the guide wire.
5. Check that the Robotic Mower changes direction near the guide wire, navigates along the guide wire toward the charging station, and docks
with the charging station.
NOTE: After the Robotic Mower detects the guide wire, it will run along the left side of the guide wire.
This completes the installation and operation checks. For the detailed usage of this product, refer to the Instruction Manual of this product.
CASES IN POINT
Here are some examples of installations and settings in use.
The details shown in the figures are only examples and to illustrate the different field scales where each case might be better suited. Make your
arrangement more appropriate according to your preferences.
Personal garden area for a resident
A cosy courtyard or a small square garden in the backyard of your house, surrounded by small fencing, paths and trails.
2
3
Fig.50
► 1. Charging station 2. Boundary wire 3. Guide wire
Practical guidance
Mowing area
Weekly working days and hours
Departure method from station [execution pri-
ority (%)]
Need to create sub area settings
Tips for installations and settings
A
2
500 m
6 hours on 6 days of the week
12 hours on 3 days of the week
Depart directly from the charging station at [100%]. Refer to the mower departing point "A" in the figure.
No
Place the charging station at the near end of the half line which divides the mowing area into two equal upper and
lower areas.
Install a guide wire along the half line which divides the mowing area into two equal upper and lower areas.
28 ENGLISH
key.
1