Art 2000 Antenna/Receiver/Transmitter - Honeywell BENDIX/KING RDR 2000 Installation Manual

BENDIX/KING
ART 2000 ANTENNA/RECEIVER/TRANSMITTERS (cont.)
STABILIZATION REQUIREMENTS:
Reference:
Inputs:
Pitch and Roll Scaling:
STABILIZATION RATE:
SCAN ANGLE:
SCAN PHYSICAL RADIUS:
SCAN RATE:
VERTICAL PROFILE:
TILT ANGLE:
PERFORMANCE INDEX:
10" Flat Plate Antenna:
12" Flat Plate Antenna:
Rev 7, July/2002
400 - 5000 Hz
26 Vrms, 400 Hz Sine Wave
115 Vrms, 400 Hz Sine Wave
20 Vp-p, 400 Hz Sine Wave
20 Vp-p, 400 Hz Square Wave
10.7 Vp-p, 400 Hz Square Wave
28 Vp-p, 5 kHz Square Wave
ARINC 429
30mV to 220mV/degree, 400 Hz or 5000 Hz
Pitch HI in phase with gyro exc. on pitch up.
Roll HI in phase with gyro exc. on right roll.
°
25 sec (pitch and roll)
° °
90 or 100 (configurable)
10 inch antenna (vert. polarized) - 5.31 inch
10 inch antenna (horiz. polarized) - 5.22 inch
12 inch antenna (vert. polarized) - 6.28 inch
12 inch antenna (horiz. polarized) - 6.20 inch
°
25 /second
°
± 30
°
± 15
209.9 dB ± 2.5 dB
212.7 dB ± 2.5 dB
00643I05.TDC
RDR 2000
Page 1-5