Table of Contents
Advertisement
Installation
4.6.2 Mount Communication Antenna (OneWireless option only)
In case of a OneWireless SmartRadar (option), a communication
antenne is delivered. Mount the communication antenna by
screwing it clockwise upon the lightning arrestor (see picture
below).
NOTE:
The lightning arrestor (see figure above) protects the
inside electronics from lightning damage. Although it will
protect against multiple discharges, it can be replaced as
a preventive maintenance action. Preventive
maintenance interval depends on location, position of the
equipment, grounding, and other protection measures
installed.
Installation Guide
22
communication antenna
lightning arrestor
SmartRadar FlexLine
2
1
Part No.: 4417.760_Rev06
Advertisement
Table of Contents
