Grounding The Chassis - Cisco Catalyst 8300 Series Hardware Installation Manual

Install the Cisco Catalyst 8300 Series Edge uCPE
Figure 11. Showing locations of holes in the brackets that can be used to secure to the wall

Grounding the Chassis

Warning
Warning
Figure 1. Grounding the Chassis
Vertical spacing; hole centre to hole centre
Horizontal spacing; hole centre to hole centre
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be
made first and disconnected last. Statement 1046
18.4"
12.06"
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
Grounding the Chassis
25