Required Tools And Equipment - Cisco Catalyst 8300 Series Hardware Installation Manual

Prepare for Installation
• Serial or console cables used to connect devices like routers.
• Shielded USB cables with properly terminated shields for the USB port.

Required Tools and Equipment

You will need the following equipment to install the device and its equipment:
• ESD-preventive cord and wrist strap
• Phillips screwdrivers: small, 3/16-in. (4 to 5 mm), and medium, 1/4-in. (6 to 7mm)
• Screws that fit your rack
• Wire crimper for chassis grounding - to be used along with the ground lug kit
• One 14 AWG cable for the ground lug kit
In addition, depending on the type of modules you plan to use, you might need the following equipment to
connect a port to an external network
• Cables for connection to the WAN and LAN ports (depending on the configuration)
Note If you order the required cables when you purchase the device, the cables ship along with the product.
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
Required Tools and Equipment
13