Communicating With The Transmitter; Sln 700 Transmitter Label; Figure 1-2: Sln 700 Transmitter Label Example - Honeywell SmartLine SLN 700 Series User Manual

1.4 Communicating with the Transmitter

Level monitoring is possible through either the analog current (4-20 mA) or HART. It is possible
to configure a transmitter using HART
Refer to manual 34-SL-25-16, SLN700 NCR HART Option Manual for details on available
HART commands

1.5 SLN 700 Transmitter Label

The transmitter label is mounted on the side of the electronics housing
(see Figure 1-2) and lists the following properties:
•
Model number
•
Physical configuration
•
Power supply voltage
•
Maximum working pressure rating
•
Certification, if ordered (SIL and CRN)
Revision 1
©

Figure 1-2: SLN 700 Transmitter label example

SLN 700 SmartLine NCR Level Transmitter User's Manual
protocol or using the four-button interface and display.
Page 3