North America - Honeywell UDC2800 Product Manual

Pollution Degree: Pollution Degree 2: Normally non-conductive
pollution with occasional conductivity caused by condensation. (Ref.
IEC 60664-1)
EMC Classification: Group 1, Class A, ISM Equipment (EN61326-1,
emissions), Industrial Equipment (EN61326-1, immunity)
Method of EMC Assessment: Technical File (TF)
Declaration of Conformity: 51453655
Deviation from the installation conditions specified in this manual,
and the special conditions for CE conformity in Subsection
Installation, may invalidate this product's conformity with the Low
Voltage and EMC Directives.

North America

Installation Category (Overvoltage Category): Category II (EN61010-1)
Pollution Degree: Pollution Degree 2: Normally non-conductive
pollution with occasional conductivity caused by condensation. (Ref.
IEC 60664-1)
ATTENTION: The emission limits of EN61326-1 are designed
to provide reasonable protection against harmful interference
when this equipment is operated in an industrial environment.
Operation of this equipment in a residential area may cause
harmful interference. This equipment generates, uses, and can
radiate radio frequency energy and may cause interference to
radio and television reception when the equipment is used
closer than 30 meters (98 feet) to the antenna(e). In special
cases, when highly susceptible apparatus is used in close
proximity, the user may have to employ additional mitigating
measures to further reduce the electromagnetic emissions of
this equipment.
WARNING: If this equipment is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired.
WARNING: If this equipment is used in a manner not specified by
the manufacturer, the protection provided by the equipment may
be impaired.
Chapter 2 - Introduction
21