Maintenance; Safety Check Before Each Use - Honeywell COMBISAFE 8800 User Instructions

Loading System MkII

Safety check before each use

Check the System before each use. All the check statements
must be fully met. Checking includes the following steps:
Loading System MkII Base unit Check Statements:
• Ensure that there is no weld damage or deformation to any part of the
system. Pay special attention to the Lifting Eyes and their welds.
• Ensure that no corrosion that can affect the strength of the system
has occurred.
• Ensure that the Feet are fully adjustable.
• Ensure that the Base unit is level.
• Ensure there are no loose parts e.g. gravel, dirt, concrete etc. in any
sleeves or tubes where other components shall be inserted.
• Ensure that the threads on the weld nuts on the Corner Posts are free
from dirt that can prevent correct fastening of the bolt. If not using
the Formwork Supports, short M12 bolts can be placed in the nuts to
protect the threads.
• Ensure that there is no damage to the Precast Kentledge concrete
blocks, if such are used.
• Ensure that all items with the insertion marking label on, are readable
and are inserted the correct length.
• Ensure the legibility of the Serial No. marking.
Top Column 4.7 and SkyReach Adaptor 5.9 Check Statements:
• Ensure that the item is inserted the correct length and that the inser-
tion marking label is readable.
• Ensure that there is no weld damage or deformation to any part of the
item.
• Ensure that no corrosion that can affect the strength of the item has
occurred.
• Ensure the legibility of the Serial No. marking.

Maintenance

Maintenance
43