Table of Contents
Advertisement
Recommended operation method
Recommended operating method
Single Unit usage
For loading or unloading a flatbed with a length of up to 8 m,
which will fit into the loading zone as described in Figure 35, a
Single Unit is required. The Single Unit consists of one Loading
System MkII Base with one SkyReach Anchor, one 6,2 m Falcon
Fall Arrest Block, one full body harness and one Top Column
4.7 (complete kit Art. No. 8805) or one SkyReach Adaptor 5.9
(complete kit Art. No. 8806), please see chapter Technical Data,
Figure 3.
This method is based on a width of the flatbed loading area
greater or equal to 2,4 m. For any width less than mentioned,
please contact Combisafe for advice.
The Base must be positioned centrally to the zone, as shown
below.
Figure 35. Working area illustration for a Single Unit usage.
1. Loading Zone
2. Operative
Any operative unloading a flatbed trailer should be wearing:
• appropriate footwear,
• reflective vest and helmet with chin strap,
• full body harness,
• harness extender 0.3 m for dorsal anchorage.
40
Loading System MkII
Advertisement
Table of Contents
