General - Honeywell COMBISAFE 8800 User Instructions

Loading System MkII

General

General
The Loading System MkII has been designed to enable the
loading and unloading of equipment from a flatbed truck or
trailer in a safe manner.
The Loading System MkII incorporates a SkyReach Anchor unit
which is connected by a Self-Retracting Lifeline (SRL) to the full
body safety harness worn by the operative.
The SkyReach Anchor is designed to deform, absorb the energy
and reduce the resulting forces, when a fall occurs.
When working at lower heights, the system can be equipped
with the Top Column 4.7. In this configuration the anchor point
is located 4,7 m above ground level. When working at higher
positions the system can be equipped with the SkyReach Adaptor
5.9 which locates the anchor point 5,9 m above ground level. The
combination of Loading System MkII and SkyReach Anchor, is
tested to comply with EN 795:2012 Type E, and is CE-certified
by DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum,
Germany, with identification no 0158.
The Loading System MkII can be used on a construction site or
in a loading yard and it can be moved to alternative locations
as needed. To ease transportation and storage, the Loading
System MkII is designed to be flat packed and stackable. When
flat packed the total height of the base is 0,6 m. The SkyReach
Anchor itself can be separated and folded for ease of transport
between locations.
When used for unloading a trailer up to 8 m in length, the
Loading System MkII Single Unit can be used. If unloading a
trailer between 8 and 14 m in length, the Loading System MkII
Double Unit should be used.
Read carefully through this user instruction before use of the
product. In case of questions and uncertainties, please contact
Combisafe for support.
3