Table of Contents
Advertisement
Storage
Loading System MkII
Storage
Always store Combisafe products in a dry and ventilated area
protected from the effects of the weather and from corrosive
substances.
Loading System MkII Base
The loading system MKII can be flat packed and stacked for
ease of storage. To make sure the Loading System MkII Base is
packed the correct way after usage, please place the parts as in
Figure 33 below. Make sure that the Feet are fully screwed in and
that the Top Frame is resting on the bottom plates in the Bottom
Frame Sockets.
Figure 33. Loading System MkII Base in packed mode.
1. 2 x Combistraps
2. 4 x Formwork Supports on each side (8 Pcs tot.)
3. Top Column 4.7
4. 4 x Corner Post
A total number of 6 flat packed units can be placed together in
one stack. On each Top Frame there are four guide plates located
to guide the next unit into position.
38
Advertisement
Table of Contents
