Table of Contents
Advertisement
Assembly
Figure 26. Use the included Combistraps to secure the Top Frame
8. Lift the assembled top unit high enough above the Cor-
ner Posts, and slowly lower the assembly when the four Top
Frame Legs can be slotted into the Corner Posts. If Formwork
Supports are bolted to the Corner Posts, make sure they are
not tightened, otherwise it can prevent the Top Frame from
being inserted in an easy way. Lower the assembly slowly and
make sure it runs smoothly down into the Corner Posts.
Make sure the assembly is inserted the correct length by
checking that the lower edge of Insertion Marking Labels are
aligned with the upper edge of Corner Posts, see Figure 27.
With the Top Frame in place, the Formwork Supports can be
tightened firmly, if they are being used.
30
to the forks prior to lifting.
Loading System MkII
Advertisement
Table of Contents
