Table of Contents
Advertisement
Assembly
Loading System MkII
5.2. Cut four pieces of 18 mm formwork plywood, complying with
EN 636-3, to the format as shown in Figure 23. Place the
boards one after another in the Base, with the notches fac-
ing down, leaning against the Formwork Supports, see Fig-
ure 24. The boards shall be placed onto the Bottom Frame
itself and not onto the Bottom Board. Fix the boards to the
Formwork Supports with wood screws. When all the boards
are in place and they create a box, go to step 6 for mounting
of the Top Frame.
1215
10
[mm]
Figure 23. Dimension of the gravel side board. Note that the board
has got notches in both bottom corners.
Figure 24. Placement of the side board units.
28
Advertisement
Table of Contents
