Table of Contents
Advertisement
Assembly
Figure 20. Placement of the side board units.
4.4. When all the sides are in place and the plywood boards cre-
ate a tight box, fix the boards with wood screws if needed.
Please proceed to step 6 for mounting of the top frame.
5. Gravel filled ballast option
5.1. Check that all four Corner Posts are inserted correctly into
the Bottom Frame. Cut a piece of 18 mm Formwork Ply-
wood, complying with EN 636-3, to the format as shown in
Figure 21 and place in the centre of the Bottom Frame. Bolt
the eight Formwork Supports to the welding nuts. Use the
bolts attached to the Formwork Support, see Figure 22. At
this step it is not necessary to tighten the bolts.
NB. Suitable base and side boards are available from
Combisafe, order code 11594
26
Loading System MkII
Advertisement
Table of Contents
