Manual Alarms Test - Honeywell BW RigRat User Manual

Program/Menu/Configuration Mode
Type Red LED
Program
mode
Hardware
Hardware
test
test
pattern
Device Startup
Type Red LED
Startup Startup pattern Startup pattern Startup pattern Startup pattern

Manual Alarms Test

Under Normal Operation Mode and non-alarm conditions, the buzzer (audible alarm) and
visible alarms can all be tested anytime by turning off the instrument or bump testing the
instrument. If any alarm does not respond, check the alarm settings to make sure all alarms are
enabled. If any alarms are enabled but not functional, the instrument should not be used.
Contact Technical Support.
BW RigRat
Yellow Green
LED LED
1 beeps/s
Hardware Hardware
test test
pattern pattern
Yellow LED
Buzzer LCD Display Reading
In menu or
configuration
screens
Hardware
test
pattern
Green LED
91
For bump/cal
operation, changing
configuration
Buzzer LCD Display Reading
Notes
User Manual