Honeywell BW RigRat User Manual page 72

Navigating Diagnostic Mode
Step through Diagnostic Mode by pressing the button. The first screen shows information
about the product, including the serial number, firmware version, etc. Exit Diagnostic Mode at
any time by shutting the instrument off at this screen (hold the button for the 3-second
countdown).
Instrument model name and ID number (in hexadecimal)
l
Serial number
l
Instrument firmware Version
l
Firmware build date
l
Firmware build time
l
RTC
l
Sensors Installed
l
Socket Raw Counts (for all enabled sensors)
l
Sensors Serial Number
l
Sensors Zero and Span raw counts
l
Sensors produced date and warranty
l
Battery capacity/voltage/current/temperature/SOH/cycle counts
l
Battery current at idle mode (Hold button to enter idle mode and calculate)
l
RAEMet readings (if installed)
l
Noise sensor information (if installed. Hold to start calibration.)
l
GPS information (if installed)
l
LCD test (Hold to start test procedure.)
l
LED and Buzzer test (Hold to start test procedure)
l
Switch output/Digital input/4~20mA information (Hold to test switch output.)
l
BW RigRat 71 User Manual