Honeywell BW RigRat User Manual page 36

Mesh Connect to Controller
Set the BW RigRat instruments' mesh wireless Network Mode to STD or Router by using
l
the Device Configurator app.
Set the BW RigRatt, Portable devices, Mesh Router, and Controller to have the same PAN
l
ID/Channel.
The network is now ready. The BW RigRat instruments will show on the Controller
l
display.
Note: A router can bypass data. STD cannot bypass data, and can only act as an end device.
Enabling Router will cause theBW RigRat to consume more energy and decrease overall
runtime before recharging is necessary.
BW RigRat
Mesh 868/915MHz
Mesh 2.4GHz
35 User Manual