Honeywell BW RigRat User Manual page 37

Mesh Connect to Radiant Reader
Set the BW RigRat instruments' mesh wireless Network Mode to STD or RTR by using the
l
Device Configurator app.
Set the BW RigRat PAN ID/Channel to be the same as those in Radiant Reader.
l
The BW RigRat now joins the network and can show information on PC software.
l
Note: A router can bypass data. STD cannot bypass data, and can only act as an end device.
Enabling Router will cause the BW RigRat to consume more energy and decrease overall
runtime before recharging is necessary.
BW RigRat 36 User Manual