Mesh/Rf Wireless Network (If Supported) - Honeywell BW RigRat User Manual

Mesh/RF Wireless Network (if supported)

Mesh Closed-Loop Network
Note: If the BW RigRat is used as a repeater without sensors, it will display a blank screen.
Use the Device Configurator app to set all BW RigRat instruments' mesh wireless
l
Network Mode to Closed Loop.
Set all BW RigRat instruments' mesh wireless PAN ID/Channel so that they are all the
l
same.
The BW RigRat instruments can now connect to each other.
l
The following are shown on theBW RigRat LCD:
l
l
Mesh icon:
l
Network status: Not in network or remote device is in alarm
At the Mesh Network Summary screen, you can find more other BW RigRat status
l
information.
BW RigRat 34
or in network
User Manual