Configuring Scene Changing Settings; Figure 7-5 Scene Changing - Honeywell Performance Series User Manual

Period
Record
Record Delay
Relay-out
Alarm Delay
Send Email
Snapshot
Click Save.
3.

Configuring Scene Changing Settings

Setup
1. Go to 
2. Configure the parameters.

Figure 7-5 Scene Changing

HEW4PER2V/HEW2PER2V/H4W2PER2V/HBW2PER2V.
The video tampering function is activated during the specified period.
See Configuring the Alarm Period
You can configure up to six periods per day. Select a date. If you do
not select a date, the current setup will be applied to today only.
You can select All to apply the alarm period to the whole week.
Click Save to exit.
If Record is enabled, a camera tampering event can activate
recording.
The system will wait for the specified time before it begins recording.
Select from 10s to 300s.
Select the Relay-out check box, and when alarm is triggered, the
system interacts with the linked alarm devices.
The Alarm linkage keeps running for the configured time after alarm is
ended.
When enabled, the system sends an email alert when an alarm occurs.
When enabled, the system attaches a snapshot to an email alert when
an alarm occurs.
Video Analytics
 Video Detection  Scene Changing.
Configuring Video Analytics Settings
on page 51.
55