Figure 7-6 Audio Detection; Table 7-4 Scene Change Configurations - Honeywell Performance Series User Manual

Figure 7-6 Audio Detection

Table 7-4 Scene Change Configurations

Parameter Function
Enable Input
Select Enable Input Abnormal and it will trigger alarms when it detects
Abnormality audio input abnormity.
Enable Intensity Select Enable Intensity Change and it will trigger alarms when it detects
Change that audio intensity change exceeds the threshold.
Drag the slider to adjust the sensitivity value. The default value is 50.
When the input volume change exceeds continuous environment
Sensitivity
volume, it can be judged as audio abnormity. You need to adjust it
according to the actual environment test.
Drag the slider to adjust the threshold value. The default value is 50. If
Threshold the environmental noise is too big, then the value needs to be set
higher. You need to adjust it according to the actual environment test.
The audio detection function is activated during the specified period.
See
Alarm Period
You can configure up to six periods per day. Select a date. If you do not
select a date, the current setup will be applied to today only. You can
select All to apply the alarm period to the whole week.
Configuring the Alarm Period
Configuring Video Analytics Settings
on page 51.
57