Nas; Figure 8-5 Sftp; Figure 8-6 Nas; Table 8-2 Sftp Configurations - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide

Figure 8-5 SFTP

Table 8-2 SFTP Configurations

Parameter
Enable
Server Address
Port
Username
Password
Remote Directory
Emergency
(Local)

NAS

On the NAS tab, you can enable network attached storage and configure storage settings.

Figure 8-6 NAS

Table 8-3 NAS Configurations

Parameter
Enable
Server Address
70
Function
Check to enable the SFTP storage function.
Enter the IP address of the SFTP server.
The default setting is 21. You can modify this setting as
necessary.
Enter the server user name.
Enter the server password.
Create a name for the directory where recorded video and
snapshots will be stored.
Select Emergency (Local), and when the SFTP server does not
work, all the files are saved to the internal SD card.
Function
Select the checkbox to enable this function.
Set the IP address of the server.