Configuring Scene Change Events - Honeywell Performance Series User Manual

7.
8.

Configuring Scene Change Events

You can configure scene change event settings on the Setup > Event > Video Detection >
Scene Changing page.
To take a snapshot when a tampering event is detected, select the Snapshot check box.
Note For the snapshot to be attached to the email notification, the Attachment
check box must be selected in Setup > Network > SMTP (Email).
See Configuring Email Settings
Click Save to apply the settings.
Configuring Events and Alarms | 65
on page 49.
800-23288 - A - 07/2017