Configuring Ieee802.1X Settings; Figure 6-11 802.1X; Table 6-5 Multicast Configurations; Table 6-6 802.1X Configurations - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide

Table 6-5 Multicast Configurations

Parameter
Enable
Multicast
Address
Port

Configuring IEEE802.1X Settings

Go to Setup  Network Setup 802.1X.
IEEE802.1X is the access control and authentication protocol for local and metropolitan area
networks. It uses a port-based network access control protocol to restrict unauthorized user
and/or device access to the LAN.
IEEE802.1X supports the client's ability to manually choose how authentication works for
accessing the LAN or not. IEEE802.1X supports the ability to:
authenticate
•
calculate the fee
•
ensure security
•
• maintain requirements

Figure 6-11 802.1X

Table 6-6 802.1X Configurations

Parameter
Enable
Authentication
Username
Password
44
Function
Select the check box to enable the multicast function.
Note Main stream and sub stream cannot be used at the same time.
The main/sub stream multicast address is 224.1.2.4 and its range is
224.0.0.0 ‒ 239.255.255.255.
Multicast port. The default multicast port of main stream is 40000,
and the default multicast port of sub stream is 40016. The range is
1025 ‒ 65500.
Function
Select the check box to enable this function.
PEAP (protected EAP protocol)
Enter a username to log in. This username is authenticated by
the server.
Enter a password.