Paidfeatures - Cisco ATA 186 Administrator's Manual

Chapter 5 Parameters and Defaults
Table 5-2 CallFeatures Parameter Bit Definitions (continued)
Bit
Number Definition
12-14 Reserved.
and
28-30
15 and 31 Fax mode. This service allows the user to set the Cisco ATA to Fax mode on a per-call basis.

PaidFeatures

Description
Unsubscribe/subscribe to CallFeatures by setting each corresponding bit to either 0 or 1. The lower 16
bits are for the Phone 1 port, and the upper 16 bits are for the Phone 2 port.
definitions of each bit.
Value Type
Bitmap
Default
0xffffffff
Voice Configuration Menu Access Code
315
Related Parameters
•
•
•
•
Table 5-3 PaidFeatures Parameter Bit Definitions
Bit Number Definition
0 and 16 Not used for H.323.
1 and 17 Not used for H.323.
2 and 18 Not used for H.323.
3 and 19 CLIP (if set to 1)/CLIR (if set to 0)
4 and 20 Call waiting
5 and 21 Three-way calling
6 and 22 Not used for H.323.
7 and 23 Not used for H.323.
8 and 24 Caller ID.
9 and 25 Not used for H.323.
OL-4008-01
CallFeatures, page 5-24
CallCmd, page 5-46
CallerIdMethod, page 5-26
SigTimer, page 5-32
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
Operating Parameters
Table 5-3 provides
5-25