Optional Feature Parameters
Voice Configuration Menu Access Code
81
RingOnOffTime
Description
This parameter specifies the ringer cadence pattern, expressed as a triplet of integers "a,b, and c".
•
•
•
Value Type
List of three integer values, separated by commas
Range
1-65535
Default
2, 4, 25
Recommended Values:
•
•
Voice Configuration Menu Access Code
929
IPDialPlan
Description
This parameter allows for detection of IP-like destination address in DialPlan. Three values are valid:
•
•
•
All other values are currently undefined.
Value Type
Integer
Range
0, 1 or 2
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (H.323)
5-36
a—Number of seconds to turn the ring ON.
b—Number of seconds to turn the ring OFF.
c—The ring frequency, fixed at 25.
United States —2,4,25
Sweden — 1,5,25
0—String is dialed as is and not treated as an IP address.
1—When the Cisco ATA detects two asterisks (**), IPDialPlan takes over. The user enters the pound
(#) key to terminate the digit collection, and the interdigit timeout default is not used.
2—When IPDialPlan is set to 2, three asterisks (***) are required for IPDialPlan to take effect.
Chapter 5
Parameters and Defaults
OL-4008-01